Services

Repair works

Including soldering, resizing, mounting assembly and installing peg setting.

Soldering

This will make the broken area solid again and if done properly, you won’t see the repairs.

Resizing

This service is available for rings, necklaces, chains, and bracelets. Due to their unique design, however, some products cannot be resized.

Mounting assembly

Process of forming a piece of jewelry by pouring a molten or liquid substance into a mold until it solidifies and takes on the impression of the mold.

Installing peg setting

Is die-struck and mechanically formed and, when soldered onto a ring correctly, offers a quality mounting in which to set diamonds and colored gems.

Remount

Including prong, invisible, bezel, flush, cluster and channels.

Prong

Can re-tip and or replace worn prongs on your rings. Before you leave your diamond rings, we show you the diamonds under our microscope and identify all the inclusions, draw them on your receipt, so that we can prove to you it is the same diamond after the repair.

Invisible

The stones are set next to each other without any visible metal holding them in place.

Bezel

Is a metal band that wraps around a diamond to hold it in place. Bezel mountings can make a diamond look larger.

Flush

The diamond rests in a hole that blends in with the rest of the band. This mounting resembles a bezel setting but without any metal wrapping around the face of the diamond.

Cluster

Multiple diamonds or gemstones to be set in a specific design pattern such a heart, grapes etc.

Channels

Loose stones and Metal worn from the top and/or side of the channel.

Casting

In 10K, 14K, 18K (yellow, white, rose, green) gold and sterling silver.

Hand Fabrication

Including bezel, seat and channel sets and bail repair.

Bezel

Is a metal band that wraps around a diamond to hold it in place. Bezel mountings can make a diamond look larger.

Seat and Channel Sets

Loose stones and Metal worn from the top and/or side of the channel.

Bail repair

Is the process for changing the bail on a pendant.

Stone setting

Including tightening, channel set, bezel set, bead set, pave’ set and stone cutting.

Tightening

Channel set

Loose stones and Metal worn from the top and/or side of the channel.

Bezel set

Is a metal band that wraps around a diamond to hold it in place. Bezel mountings can make a diamond look larger.

Pave set

Covers a jewelry surface with gemstones set so closely together that it’s hard to see where one ends and one begins.

Stone Cutting

We provide the service of repairing broken diamonds.

Finishing

Including plating, enamel/epoxy, polishing & cleaning, satin finish and Florentine finish.

Plating

We can provide polishing, buffing and cleaning services to remove the minor scratches and resort its luster.

Enamel/Epoxy

This is for making and repairing jewelry and all hobbies and crafts.

Polishing and Cleaning

Simple cleaning

Removes impurities, dust and fingerprints from the surface of your precious jewel. In some cases, it also removes very light scratches on the bright polished surface of the jewel.

Ultrasonic cleaning

This deep, through cleaning will remove dirt from the jewel for a perfect luster. Ultrasonic cleaning is not recommended for pearls, coral, coins and emeralds.

Satin finish and Florentine finish

Engraving

Including simple ring engraving.

Ring engraving

Engraving the inside of your ring adds a personal touch to make your ring truly unique, and makes a gifted ring for a loved one more meaningful. Engraving a name, initials, date, scripture, quote, or other special message, creates a personalized ring that will always be cherished.

Diamond Grading

Including colour grade, clarity grade and cut grade.

Colour grade

Graded for colour using two main methods. The first is comparison with stones of known colour and the second is similar but uses hi tech calibrated digital systems.

Clarity grade

Can refer to either “laser drilling” and/or “feather filling”.

Cut grade

Cutting the diamond.

Custom design work

Personalized design.